LROD Paving and Engineering

A family tradition since 2015​

Asphalt Milling in San Antonio, TX 78253

There isn't much to know about gravel and its use in daily life. A building project may quickly get this material, and it has been utilized successfully for a wide range of applications. As a result, many individuals tend to miss that gravel is not the only option.

Asphalt milling, which happens before laying asphalt, is critical in the paving process. Asphalt millings may readily replace gravel, and they even provide many advantages that conventional gravel does not.

What Are Asphalt Millings?

What exactly are asphalt millings? Asphalt millings are recycled asphalt that has been crushed into a fine powder. Also known as reclaimed asphalt pavement (RAP), they are waste and byproduct materials in pavement building, according to the Federal Highway Administration of the US Department of Transportation. They are a cost-effective alternative to total deconstruction and repaving for asphalt surface rehabilitation.

Asphalt milling is one of two primary procedures for removing asphalt. Asphalt millings result from pulverizing old asphalt into tiny particles that are about the same size as gravel. With a cold milling machine, it is possible to remove up to 2 inches of asphalt in a single pass.

Each year, the United States generates up to 41 million metric tons of waste (or 45 million tons). Much of the asphalt concrete waste is now being used in either recycled hot-mix and cold-mix asphalt preparations or aggregates in stabilized or granular base and subbase materials.

Since its inception in the middle of the 1970s, it's now evolved into a viable option that paving contractors may use to restore pavement for corporations, governments, and private citizens alike. Resurfacing roads, parking lots, and paving in business and residential areas is all possible.

How Is Asphalt Milled?

A human-driven cold milling machine digs up existing asphalt surfaces while milling asphalt for road repair and resurfacing. Two-inch-deep rows of metal cutting teeth set diagonally on a big revolving cutting disc tear up the surface. The equipment that smashes the substrate runs it through a grinder.

Conveyor belts are installed at the front of the machine to transfer the crushed material to screening or sieving equipment. Once the conveyor has finished loading the poorly milled asphalt, it moves slightly ahead of the cold milling machine and onto a truck. Loads are unloaded onto a temporary stockpile and utilized on the roadside shoulders afterward.

Cold milling machines may be as little as 1 ft 2 in and as large as 14 ft 5 in width. Larger machines may reach working depths of up to 14 inches in a single pass.

The surface is swept and cleaned when the milling machine has removed the asphalt to a specific width. It cleans the area so that the new asphalt can adhere to the existing surface. Once the old asphalt has been removed, the new asphalt should be able to stick to it better because of the rough texture it has from milling.

What Are the Benefits of Asphalt Milling?

The following are some of the advantages of using recycled asphalt or milled asphalt.

Cost-Efficient
It doesn't take much time or money to maintain asphalt millings. It is only necessary to grade and recompact asphalt millings once they have been compacted once. It is a more affordable method of maintenance. In saving money on future repairs, recycled asphalt is an excellent option. Asphalt millings are a cost-effective alternative to your following product.

Environmentally Friendly
The carbon footprint of asphalt millings is much lower than that of fresh asphalt or other paving materials. They are made of just crushed asphalt. In some instances, it may even qualify you for LEED points if you use it for your paving project.

Weather Resistant
Asphalt's adaptability is unmatched; it may become brittle in the cold and soft in the summer. Since high temperatures more easily damage fresh asphalt, this capability makes pavement milling an essential tool. Additionally, since it has a higher porosity than standard asphalt or concrete, it's a better drainer in places prone to flooding or snow and ice accumulation.

Curb Appeal
There is no denying that millings lack the striking black hue of fresh asphalt, but many homeowners find the faded appearance desirable for the proper sort of residence. Unlike freshly laid asphalt, asphalt millings have an appearance that is somewhere between gravel and new asphalt.

Improved Surface
It is possible to remove bumps, ruts, and other surface abnormalities by using asphalt milling. For the pavement to be appropriately level, asphalt milling removes the necessary number of pavement layers. Additionally, milling asphalt improves drainage and provides a textured surface for skid control.

Durability
Over time, asphalt hardens, making the surface of your parking lot, driveway, or private road more durable. As a result, refinishing, resurfacing, or replacing surfaces will be less frequent. When it comes to weather-resistant paving, recycled asphalt can be valuable. To put it another way, this will save you money over time.

A Specific Problem-Solving Approach
Asphalt milling is an option if damage to your parking lot or other asphalt structure is localized and cannot be corrected by repaving the whole area. It may be used to remove the asphalt to the proper depth and replace it with new asphalt at the same level as the rest of the road.

Pavement Height and Drainage
An overlay can be used to repair a pavement's surface. Thanks to this method, keeping its original height while improving it is possible. To increase the pavement height, each time an overlay technique is conducted, a new asphalt layer must be placed on top of the current asphalt layer.

When Do You Know You Need Asphalt Milling?

If your pavement has begun to "unravel" from the top down, has cracks in the paving surface that allow water in, or if the top layer of asphalt is shoving, an experienced contractor will advise you to use an asphalt milling solution. If your pavement has drainage issues and needs drainage swales cut to allow water to drain correctly, a professional contractor will advise using asphalt milling as a solution.

Our professionals can help you determine whether asphalt milling is the best option for upgrading your pavement. Contact LROD Paving and Engineering for a quote on asphalt services and more.