About Parking Lot Paving
Asphalt paving is one of the most commonly used forms of construction today. This is due to its high adaptability and low cost. In addition, it is also considered to be a very practical option when it comes to home paving. However, it does have certain shortcomings that need to be taken note of. Read on to know about some of these and consider whether you should opt for asphalt or not.
One of the disadvantages of using an asphalt driveway is that it can be quite slippery. You need to make sure, therefore, that you drive your car carefully on it. And even if you do so, there is still a chance of your vehicle getting stuck on the asphalt. So, you should keep a good grip on the steering wheel and use all the available help you can. This is especially important if you are making a long distance drive.
There is also a possibility that asphalt might damage the surface underneath if it is not properly sealed. This is because asphalt is a petroleum product and petroleum products can cause damage to the environment. Therefore, you should make sure that the paved area is adequately sealed to make sure that it does not erode.
It is also important to remember that asphalt can crack when it gets too wet. If this happens, you will need to replace the area with new asphalt so that it does not get cracked again in future. Otherwise, you may end up spending more on repairing cracks that you have caused. In fact, asphalt cracks can be a real headache especially during heavy rains when the paver becomes very susceptible to water penetration.
Apart from this, asphalt is also susceptible to cracking when it is exposed to heat. This is especially true during summer months when the temperature is high. During this period, it is possible for the asphalt to get very soft and mushy. When this happens, it is much harder to seal the surface properly and repair any cracks that have developed.
Another problem that can occur with an asphalt paver is when it is being used improperly. For instance, when the asphalt paver is being used to pave driveways, it can easily grind over the edges of the driveway. The grout lines might also get damaged during this process. In fact, there are some homeowners who prefer using concrete or paved paths in front of their homes and driveways. However, they often forget that they should also seal these paths. Sealing the pathways will help to keep them protected from debris, grit, water and sand.
Homeowners should therefore find a qualified company to clean up their asphalt paver once in a while. These professionals will use a pressure washer to remove all the dirt and debris that have built up on the paver. They will then use a power washer to completely clean the water surface. After this is done, you can simply have the surfaces sealed and maintained by your local company.
By hiring a company to perform regular maintenance on your asphalt paver, you will be able to prevent some very common problems. For instance, if you find that the pavers have cracks, you can ask your local maintenance company to repair these cracks before they become larger. You can also ask them to apply new asphalt once a year. If you forget to do this, the asphalt will eventually wear out and begin to crack again. By properly maintaining your asphalt paver, you will be able to save yourself money in the long run because you will not have to call maintenance on a regular basis.
Parking Lot Repair and Paving Available to You!
Do you have a parking lot on your property? Do you want it to be paved? You’ve come to the right place. LROD Paving and Engineering can provide you with excellent parking lot repair and paving solutions at competitive rates. We work with residential and commercial clients in San Antonio, TX 78253 and are always prepared to lend a helping hand. Keep reading to learn more about us.
Why Hire Professionals?
Working with asphalt is not for everyone. It requires expertise and a keen eye for details. If you’re not familiar with the available paving solutions, the materials, their installation, and maintenance, you could end up spending a lot more than you initially planned. That’s exactly what you wouldn’t want to happen. Make sure the project goes smoothly and on time by entrusting the task to professionals like us. We’re used to the challenges that come with paving projects and we’re equipped with the right tools and materials.
We’ll Pave the Driveway for You!
Our driveway paving service follows proper procedures so that the driveway will be paved correctly. We’ll prepare the paver material you choose and we’ll make sure that the material is applied properly to avoid any kind of costly mistakes. We can work our way around any kind of paver material so, no matter what you choose, you can expect excellent results from us. If any cracks or holes start to appear, we’ll seal and plug them up so that the surface of the driveway will be smooth and damage-free. Want your driveway to be paved? You know who to call.
LROD Paving and Engineering is a driveway paving specialist who can finally pave the surface of your driveway. Do you want the driveway on your property in San Antonio, TX 78253 to be professionally paved? Give us a call at 210-260-1500 today so we can start right away!
The Four Keys to Quality Commercial Parking Lot Paving
Asphalt paving is one of the most important investments you can make for your business. A quality parking lot provides a safe and attractive space for customers and employees, and it also protects your investment by withstanding the wear and tear of daily use.
When it comes to commercial paving, there are four key factors to consider:
Proper preparation is essential to a quality asphalt pavement. The base must be compacted, and level before any paving can begin. At this stage, cracks or potholes need to be repaired.
Only high-quality materials should be used for commercial paving projects. Cheap materials will look bad, and they will also degrade quickly and needs to be replaced more often.
Once the materials have been selected, it is important to ensure they are installed correctly. Paving should be done by experienced professionals who properly lay asphalt like LROD Paving and Engineering.
Proper maintenance is the key to prolonging the life of your asphalt pavement. It is important to seal coat and repair any cracks or damage as soon as possible.
We are dedicated to delivering high-quality material, experienced installation or repair, and the best customer care in the business. We pay attention to every aspect of your project to help ensure that your project is completed on time and on budget, looks great, and can stand up to years of foot or vehicle traffic.
About Bulverde, TX
It is also called "The Front Porch of the Texas Hill Country". Bulverde's first people were Native Americans. A type of arrowhead known as the Bulverde Point is named after the style of arrowhead made by Native Americans who lived in the area during the period 2,500 to 600 BCE.
Bulverde was settled in 1850 and called "Pieper Settlement", after Anton Pieper. It was mainly settled by German immigrants similar to nearby New Braunfels. For many years the closest post office was at Smithson Valley, and mail was delivered once a week to the house of Carl Koch in Bulverde. A local post office that operated from 1879 to 1919 was named for Luciano Bulverdo, an early area landowner.
In the period between 1996 and 1999, 5 separate municipalities were incorporated and combined in the Bulverde area to form the current City of Bulverde. This process required 22 separate elections. In May 2015, the people of Bulverde voted to adopt a home rule charter to have more control over development.
Bulverde is located in western Comal County at, about 26 miles (42 km) north of downtown San Antonio. U.S. Route 281 passes through the east side of Bulverde, leading south to San Antonio and north 25 miles (40 km) to Blanco. Cibolo Creek, which forms the Comal County/Bexar County line, runs just south of Bulverde.
According to the United States Census Bureau, the city has a total area of 9.7 square miles (25.2 km), of which 0.01 square miles (0.02 km2), or 0.09%, is water.
As of the 2020 United States census, there were 5,692 people, 1,885 households, and 1,534 families residing in the city.
As of the census of 2000, there were 3,761 people, 1,292 households, and 1,131 families residing in the city. The population density was 495.7 people per square mile (191.3/km2). There were 1,349 housing units at an average density of 177.8 per square mile (68.6/km). The racial makeup of the city was 95.32% White, 0.32% African American, 0.32% Native American, 0.51% Asian, 0.03% Pacific Islander, 1.81% from other races, and 1.70% from two or more races. Hispanic or Latino of any race were 10.95% of the population.
There were 1,292 households, out of which 41.6% had children under the age of 18 living with them, 79.6% were married couples living together, 5.7% had a female householder with no husband present, and 12.4% were non-families. 10.1% of all households were made up of individuals, and 3.6% had someone living alone who was 65 years of age or older. The average household size was 2.91 and the average family size was 3.12.
In the city, the population was spread out, with 28.3% under the age of 18, 5.2% from 18 to 24, 27.7% from 25 to 44, 29.2% from 45 to 64, and 9.6% who were 65 years of age or older. The median age was 40 years. For every 100 females, there were 101.3 males. For every 100 females age 18 and over, there were 96.4 males.
The median income for a household in the city was $67,055, and the median income for a family was $68,019. Males had a median income of $49,245 versus $30,717 for females. The per capita income for the city was $26,887. About 1.5% of families and 2.3% of the population were below the poverty line, including none of those under the age of eighteen or sixty-five or over.